Millimetres describe paper size
A 35 × 45 mm requirement tells you the physical portrait size. The calculator converts that measurement into a whole-pixel target at the chosen DPI.
Print utility / pixel conversion
Convert physical passport photo dimensions into whole pixels at a chosen DPI. One inch equals 25.4 millimetres, and the result stays in your browser.
Long-tail search guide
The rounded result is approximately 413 × 531 pixels. Use the calculator when a printed specification gives millimetres and a digital workflow gives pixels, but do not replace the authority’s stated range with a generic conversion.
Print and pixel conversion guide
DPI conversion is a supporting step, not a replacement for the country rule. Use it to translate a physical print size into a pixel canvas while keeping the authority’s stated range and channel in view.
A 35 × 45 mm requirement tells you the physical portrait size. The calculator converts that measurement into a whole-pixel target at the chosen DPI.
Digital portals often care about pixel dimensions, file type, and file size instead of a print DPI instruction. Check all three separately.
When you make a print sheet, turn off “Fit to page” and verify the paper size so the exported portrait does not scale unexpectedly.
Use the width and height published for your passport or visa application.
Use the authority or print provider’s value; 300 DPI is only a common preparation default.
Keep the rounded pixel result within the official digital range before exporting.
Questions before you submit
Use the selected country profile, then confirm the current receiving-authority rule before final upload or printing.
Open requirements guideAt 300 DPI, 35 × 45 mm converts to approximately 413 × 531 pixels after rounding to whole pixels.
The calculator uses 300 DPI as the common print preparation default, but the receiving authority or print provider may specify a different workflow.
Pixels equal millimetres divided by 25.4, multiplied by DPI, then rounded to whole pixels. The calculator applies this formula in the browser.
DPI is a print-density instruction. For a digital upload, the authority usually specifies pixel dimensions, file type, and file size separately.
Yes. Enter 50.8 mm for both width and height and choose the DPI you need. The US specification page also calculates its 300 DPI print target.
Millimetres and inches do not always convert to whole pixels. Rounding is necessary, and the authority’s stated pixel range remains the final rule.