Sizes and pixels · 7 min read
Passport Photo Size in Millimetres, Inches, and Pixels
Understand the difference between physical size, pixel dimensions, DPI, and file-size limits before preparing a passport or visa photo.
Quick answer
Millimetres and inches describe the printed photograph. Pixels describe the digital canvas. DPI connects the two, but it does not replace an authority’s own pixel range, file-size limit, face framing, or background rule.
- 2 × 2 inches is 51 × 51 mm and commonly converts to 600 × 600 pixels at 300 DPI.
- 35 × 45 mm is approximately 413 × 531 pixels at 300 DPI before rounding.
- A correct physical ratio can still fail a digital upload if the pixels or KB limit are wrong.
- Always separate mathematical conversion from the exact rule published by the receiving authority.
The short answer: four measurements work together
Passport photo requirements often mix four different measurements: physical width and height, pixel width and height, DPI, and file size. They are related, but they are not interchangeable. A print shop cares about paper size and scale; an upload portal may care about pixels, JPEG format, and KB; the authority may also care about the face height inside the frame.
Before editing, copy the exact wording from the authority’s page into a checklist. Mark each item as physical size, pixel range, file format, file size, composition, or print channel. This prevents a technically correct conversion from being mistaken for complete compliance.
| Item | Requirement | What to check |
|---|---|---|
| Millimetres / inches | Physical print size | Controls the size on paper when printed at 100%. |
| Pixels | Digital canvas size | Controls the image dimensions for uploads and scans. |
| DPI / PPI | Print resolution relationship | Used to calculate pixels from a physical size. |
| KB / MB | File weight | A compression or upload limit, not a crop dimension. |
How to convert inches or millimetres to pixels
For inches, multiply each dimension by the selected DPI. A 2 × 2 inch photo at 300 DPI is 600 × 600 pixels. For millimetres, first convert millimetres to inches by dividing by 25.4, then multiply by DPI and round to whole pixels.
For example, 35 × 45 mm at 300 DPI is approximately 413 × 531 pixels. That is a mathematical print conversion, not a promise that every 35 × 45 mm application accepts exactly those pixels. If the portal gives its own pixel range, use the portal’s rule.
- 01
Find the physical size
Write down the width and height in millimetres or inches.
- 02
Choose the declared DPI
Use the DPI required by the application or print workflow, commonly 300 DPI for preparation.
- 03
Calculate and round
Convert each side independently, then round to whole pixels without changing the ratio.
- 04
Check the authority rule
Replace the calculated target if the upload portal specifies a different pixel range or file limit.
Common passport photo size examples
The examples below are useful starting points for choosing a tool preset. They are not a substitute for the official page connected to your document, because the same country can have separate rules for passports, visas, identity cards, and online renewals.
| Item | Requirement | What to check |
|---|---|---|
| US passport | 2 × 2 in / 51 × 51 mm | Square print format; digital rules may be separate. |
| France / Schengen visa | 35 × 45 mm | Confirm the mission and visa-centre instructions. |
| Italy visa | 35 × 40 mm | Use the Italy-specific preset rather than a generic Schengen crop. |
| Canada passport | 50 × 70 mm | Portrait format with specific face and studio requirements. |
| China passport-style document | Country-specific portrait ratio | Open the linked authority guidance before submission. |
Why a correct pixel size can still be rejected
Pixels only describe the canvas. They do not tell the reviewer whether the head is too large, the chin is too low, the background has a shadow, the expression is acceptable, or the image has been retouched. A 600 × 600 image can be perfectly square and still fail a US visa review if the face or background is wrong.
File size introduces another independent constraint. If the portal says the image must be under a particular KB limit, reduce JPEG quality or remove unnecessary metadata before changing the crop. Re-check width, height, format, and file size after compression.
- Do not stretch a portrait image into a square canvas.
- Do not resize only the width and let the height change automatically.
- Do not use “fit to page” when the printed dimensions must be exact.
- Do not assume 300 DPI overrides a portal’s explicit pixel requirement.
A reliable final-file checklist
- 01
Open the original source
Confirm the current dimensions, pixel range, format, file size, and submission channel.
- 02
Use the exact preset
Choose the country and document rather than a generic passport template.
- 03
Inspect the composition
Check face position, head height, eyes, expression, background, and visible shoulders.
- 04
Inspect the downloaded file
Verify the actual width, height, file type, KB, and print scale after export.
FAQ
Questions people ask before submitting a photo
What size is a passport photo in pixels?
There is no single answer. A US 2 × 2 inch print converts to 600 × 600 pixels at 300 DPI, while 35 × 45 mm converts to approximately 413 × 531 pixels at 300 DPI. Digital portals can specify their own range.
Is 600 × 600 pixels always enough?
No. It is a common 300 DPI conversion for a 2 × 2 inch print, but the authority may require a different minimum, maximum, or file size. Read the exact application instructions.
What DPI should a passport photo use?
Use the DPI stated by the authority when one is provided. For a print preparation workflow, 300 DPI is a practical conversion baseline, but it does not override a digital upload rule.
Can I convert a 35 × 45 mm photo to 2 × 2 inches?
You can crop and resize the image, but that does not make it valid for both requirements. The final format must match the document you are applying for.
How do I reduce the file size without changing dimensions?
Keep the canvas width and height fixed, then reduce JPEG quality or remove unnecessary metadata. Inspect the final file after compression because some tools silently resize images.
Authority check
Open the official source before submission
IDPicMaker helps prepare dimensions, crop, file output, and print layout. The passport office, embassy, visa centre, or government portal has final authority over acceptance.
Ready to prepare the file?
Choose the exact country and document first.
Start with the requirement, then crop, resize, check, and prepare the print or digital output.